пароль по умолчанию linksys wrt542g

For 'Network Mode' set to 'Mixed'.

For 'Wireless Configuration' mark 'Enable'

By default 'Basic Wireless Setting' should be chosen, if not click it now.

Once logged into your router click on the "Wireless" tab.

using the reset button on most routers.

If you have changed it and don't remember it you may have to reset your device to factory default

If you don't know it you can check our list of default router and modem password list

enter the routers username and password here.

Some router/modems require a username and/or password, if yours requires it,

Need help finding you router IP address?

Please note that you must have the http:// in order to connect to your

Open your favorite web browser and input your routers ip address in the address bar.

wireless connection and make any changes you will lose you wireless connection.

          If you are using your

be plugged into the router with your network cable and not your wireless

Note: When setting up or changing your wireless settings it is a good idea to

Linksys - WRT54G2 (Linksys Firmware)

Wireless Setup - Linksys - WRT54G2 (Linksys Firmware)

"Knowledge should be shared not hidden."

Wireless Setup - Linksys - WRT54G2 (Linksys Firmware) | PcWinTech.comв„ў